Pages

BH Curve - A brief description

The BH Curve is a plot of the Magnetic Flux Density (B) versus the Magnetic Field Strength (H).  This is an important curve in selecting materials for electric machines.  The curve tells us about the change in the Flux density of a material as the magnetic field strength is increased.

When the magnetic field strength is increased gradually, the domains inside the material exposed to the field get aligned gradually.  This results in the increasing flux density of the material. As the magnetic field strength is increased further, there comes a point where the curve flattens.  This implies that the magnetization is complete and further increase in the flux density is not possible.  This is the point of maximum positive saturation, b in the curve.

If the magnetic field strength is decreased at this time, shown by section b–c , it is observed that the magnetic flux density does not come to zero even after the magnetic field strength has been reduced to zero. 

This indicates that the material is able to retain the magnetism.  This is known as residual magnetism.
In order to bring the residual magnetism to zero, the magnetic field strength is applied in the opposite direction such that H is now negative.  

This is shown in the region of the curve c–d.  The magnetic field strength required to bring the flux density to zero is known as the coercive strength of the magnetic field.  

If the magnetic field strength is increased in the opposite direction, the magnetic flux density also increases until it reaches negative saturation, point e.  If the magnetic field strength is brought to zero, the material still retains magnetism in the opposite direction.  This is known as the negative residual magnetic strength, indicated by point f.  

If the magnetic strength is increased in the positive direction, the magnetic flux density becomes zero once again.  This is point g of the curve.  

The BH curve is also known as the hysteresis curve as the reversed curve does not follow the original curve.  
BH curves help compare the magnetic properties on one material over another while selecting a material for a specific application.